|
I take no responsibility for any injuries you may get involved in driving around without a seatbelt. it's not only there for if you crash, but if you break hard enough you may fall out of your seat and get hurt, THEN causing an accident. the seatbelt was made for a reason, and if you don't click it you get a ticket...
but this SHOULD work for you:
The enhanced "beltminder" feature can be disabled or enabled by the using the following producture. Note: the following events must occur within sixty 60 seconds of the ignition switch being placed in the On position.
1. With the ignition switch in any position except On or Start, buckle the driver side front seat belt.
2. Turn the ignition switch to the On position and wait for the seatbelt indicator reminder function to conclude (about six seconds).
3. Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.
4. Turn the ignition switch to any position except On or Start to toggle the beltminder feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed.
This should do it for you, good luck.
__________________
heeeeyyyyy now!
^ the real biz, yo.
|