pc doesn't start up anymore - GoFuckYourself.com

nico-t · 09-12-2006, 04:30 AM

yesterday i shut the pc down, i just wanted to put it on again today but it was still on - a program wasnt closed properly so it stood on all night with that 'you wish to end this program' prompt.
Sometimes this happens, and i just hit 'end program' and the computer shuts down, but now it just stayed on with just the desktop wallpaper on the screen. So i pushed reset and it doesn't do anything anymore... wtf?
The light of the pc goes on, but it doesnt load like it always does when starting up, and the monitor doesnt react anymore it stays black. It's my work pc, i need to get it running asap

Deputy Chief Command · 09-12-2006, 04:31 AM

hmm, and ?

nico-t · 09-12-2006, 04:32 AM

tips ofcourse nikka

BVF · 09-12-2006, 04:32 AM

could be a virus like what happened to me last week...Now you must do what I had to do which is run around like a chicken with its head cut off trying to find who is open the earliest that can fix your computer..

Good luck.

Acne · 09-12-2006, 04:32 AM

Pull the RAM out and reseat it. Do the same with the processor. If that doesn't work pull the drive out and slave it to another machine and copy your files.

nico-t · 09-12-2006, 04:34 AM

yea, it has to be a software problem... i was thnking that maybe some kind of boot disk helps but i got no clue if xp got those

Klen · 09-12-2006, 04:35 AM

Hit your machine with leg and perhaps then it will work

DamianJ · 09-12-2006, 04:37 AM

Does it POST when you turn it on? (make beepy noises)

Easiest thing to do is reinstall the OS. Assuming you have back ups of course.

nico-t · 09-12-2006, 05:15 AM

doesnt beep, it doesnt do anything

polish_aristocrat · 09-12-2006, 05:19 AM

sorry, I am computer illiterate, can't help you

notabook · 09-12-2006, 05:21 AM

That’s not good… potentially it’s the motherboard. No audible PC beep is a bad sign. If you have a spare video card (or onboard video) to try to make sure it’s not that, then go on to RAM if you have two sticks, try one at a time or borrow a stick from a friend. It’s doubtful it’s the PSU, but that’s a possibility, but it sounds like its getting power but it’s just not doing anything after you cut on the computer.

With this limited information, I’d have to say motherboard atm.

notabook · 09-12-2006, 05:26 AM

Also occasionally this has been known to happen w/bad PS/2 keyboard, you may wanna try another keyboard if possible or unplug it to see if computer will turn on, may wanna unplug mouse as well just for the fuck of it.

cool1 · 09-12-2006, 05:39 AM

try reinstalling xp first if thats the os you are running.
try to do a repair install so you don't lose your data.
If it is just the os it will tell you if it can do a repair install or not.

I just went through somehting very similar.
Ended up having a couple of corrupt xp files
I could not do a repair install and ended up having to do a complete reinstall, losing any data I had not backed up.

notabook · 09-12-2006, 05:47 AM

Quote:

Originally Posted by cool1

try reinstalling xp first if thats the os you are running.
try to do a repair install so you don't lose your data.
If it is just the os it will tell you if it can do a repair install or not.

I just went through somehting very similar.
Ended up having a couple of corrupt xp files
I could not do a repair install and ended up having to do a complete reinstall, losing any data I had not backed up.

I gather that when he turns on the computer, nothing happens at all. I.e. black monitor screen as you would normally see when the computer is turned off, so he is unable to reinstall XP. If it were an OS/software problem (which it doesn't sound like), just unplug the HD to see if you can actually get the computer to display any bios information, etc.

Antonio · 09-12-2006, 05:52 AM

omfg, you ignorant midgets !!!!!!!!!!!!!!!

unplug, pug in - what happens???

if there's no POWER what the fuck has that to do with the OS??????
omfg, you ignorant midgets !!!!!!!!!!!!!!! (one more time)

99% - something to do with the power supply

fhgmaster · 09-12-2006, 05:53 AM

If it doesn't POST, it's a hardware error. I would do the following:

Remove everthing from the mainboard, except CPU and PSU. If it gives a beep, proceed with step 5
try another PSU.
try another CPU.
try another mainboard.
Connect components until you find the one which causes the trouble. Blow in every connector to clean it from dust. Start with the memory.
Keyboard
Graphic card
Harddrive
the rest, one by one
If you've put back everything and it works again, it was maybe a loose connection.
Make a backup and keep it up to date. Will save your life.

Hope that helps

nico-t · 09-12-2006, 06:06 AM

wow... i just pulled every plug from the back, and got a shock when i touched the freshly pulled out printer plug... now i totally disconnected that printer

so now i only got the power plug & ofcourse the monitor connected, and now it's working again..... could it be that the printer was cousing some kinda malfunction

notabook · 09-12-2006, 06:24 AM

Quote:

Originally Posted by nico-t

wow... i just pulled every plug from the back, and got a shock when i touched the freshly pulled out printer plug... now i totally disconnected that printer

so now i only got the power plug & ofcourse the monitor connected, and now it's working again..... could it be that the printer was cousing some kinda malfunction

Wow, first I?ve heard of it being a printer! But yeah, if there?s not a good ground being made it could cause that (the problem I noted about the PS/2 keyboards doing something similar is uncommon but happens occasionally). Out of my own retarded curiosity, is it a USB printer or a Parallel printer? And then is it a laser printer or an inkjet or dye sublimation?

TSGlider · 09-12-2006, 06:24 AM

It sounds like you've got a power source issue. Might be a good idea to replace it or have someone do it for you. Inexpensive and pretty easy.

nico-t · 09-12-2006, 06:29 AM

Quote:

Originally Posted by notabook

Wow, first I?ve heard of it being a printer! But yeah, if there?s not a good ground being made it could cause that (the problem I noted about the PS/2 keyboards doing something similar is uncommon but happens occasionally). Out of my own retarded curiosity, is it a USB printer or a Parallel printer? And then is it a laser printer or an inkjet or dye sublimation?

its an ancient laserjet parallel printer

notabook · 09-12-2006, 06:37 AM

Quote:

Originally Posted by nico-t

its an ancient laserjet parallel printer

Thanks

I still use an ancient Epson EPL-8000 laser printer, the thing weighs a fucking hundred pounds and doesn't print high quality, but I've *never* had to replace anything on it, not even a new toner LOL. This thing is like from 1993, talk about a fucking sweet piece of tech.

Itchy · 09-12-2006, 06:44 AM

chainedsarah · 09-12-2006, 06:44 AM

usually only i do ruin pc s

E$_manager · 09-12-2006, 07:53 AM

where are you typing from?

09-12-2006, 04:30 AM	#1
nico-t emperor of my world Join Date: Aug 2004 Location: nethalands Posts: 29,903	pc doesn't start up anymore yesterday i shut the pc down, i just wanted to put it on again today but it was still on - a program wasnt closed properly so it stood on all night with that 'you wish to end this program' prompt. Sometimes this happens, and i just hit 'end program' and the computer shuts down, but now it just stayed on with just the desktop wallpaper on the screen. So i pushed reset and it doesn't do anything anymore... wtf? The light of the pc goes on, but it doesnt load like it always does when starting up, and the monitor doesnt react anymore it stays black. It's my work pc, i need to get it running asap

09-12-2006, 04:31 AM	#2
Deputy Chief Command Deputy Chief Command Industry Role: Join Date: Nov 2005 Posts: 4,482	hmm, and ? __________________

09-12-2006, 04:32 AM	#4
BVF Black Vagina Finder Join Date: Jan 2002 Location: The Midwest Posts: 13,975	could be a virus like what happened to me last week...Now you must do what I had to do which is run around like a chicken with its head cut off trying to find who is open the earliest that can fix your computer.. Good luck. __________________ Black Pussy Click On Mr Cosby..CCbill, 60/40, 136 FHG's....The Cos Loves Black Ghetto Pussy!!

09-12-2006, 05:19 AM	#10
polish_aristocrat Too lazy to set a custom title Join Date: Jul 2002 Posts: 40,377	sorry, I am computer illiterate, can't help you __________________ I don't use ICQ anymore.

09-12-2006, 05:21 AM	#11
notabook Confirmed User Join Date: Apr 2006 Location: Not a Library! Posts: 9,748	That’s not good… potentially it’s the motherboard. No audible PC beep is a bad sign. If you have a spare video card (or onboard video) to try to make sure it’s not that, then go on to RAM if you have two sticks, try one at a time or borrow a stick from a friend. It’s doubtful it’s the PSU, but that’s a possibility, but it sounds like its getting power but it’s just not doing anything after you cut on the computer. With this limited information, I’d have to say motherboard atm. __________________

09-12-2006, 04:32 AM	#5
Acne So Fucking Banned Join Date: Aug 2006 Location: Bel Air, CA Posts: 758	Pull the RAM out and reseat it. Do the same with the processor. If that doesn't work pull the drive out and slave it to another machine and copy your files.

09-12-2006, 04:34 AM	#6
nico-t emperor of my world Join Date: Aug 2004 Location: nethalands Posts: 29,903	yea, it has to be a software problem... i was thnking that maybe some kind of boot disk helps but i got no clue if xp got those

09-12-2006, 04:35 AM	#7
Klen Industry Role: Join Date: Aug 2006 Location: Little Vienna Posts: 32,235	Hit your machine with leg and perhaps then it will work

09-12-2006, 04:37 AM	#8
DamianJ Too lazy to set a custom title Industry Role: Join Date: Jul 2006 Location: A magical land Posts: 15,808	Does it POST when you turn it on? (make beepy noises) Easiest thing to do is reinstall the OS. Assuming you have back ups of course.

09-12-2006, 05:15 AM	#9
nico-t emperor of my world Join Date: Aug 2004 Location: nethalands Posts: 29,903	doesnt beep, it doesnt do anything

09-12-2006, 05:26 AM	#12
notabook Confirmed User Join Date: Apr 2006 Location: Not a Library! Posts: 9,748	Also occasionally this has been known to happen w/bad PS/2 keyboard, you may wanna try another keyboard if possible or unplug it to see if computer will turn on, may wanna unplug mouse as well just for the fuck of it. __________________

09-12-2006, 05:39 AM	#13
cool1 sex is good Join Date: Sep 2001 Location: Carman, MB Canada Posts: 24,939	try reinstalling xp first if thats the os you are running. try to do a repair install so you don't lose your data. If it is just the os it will tell you if it can do a repair install or not. I just went through somehting very similar. Ended up having a couple of corrupt xp files I could not do a repair install and ended up having to do a complete reinstall, losing any data I had not backed up. __________________

09-12-2006, 05:52 AM	#15
Antonio Too lazy to set a custom title Join Date: Oct 2001 Location: Spartaaaaaaaaa Posts: 14,136	omfg, you ignorant midgets !!!!!!!!!!!!!!! unplug, pug in - what happens??? if there's no POWER what the fuck has that to do with the OS?????? omfg, you ignorant midgets !!!!!!!!!!!!!!! (one more time) 99% - something to do with the power supply

09-12-2006, 05:53 AM	#16
fhgmaster Confirmed User Join Date: Sep 2006 Posts: 187	If it doesn't POST, it's a hardware error. I would do the following: Remove everthing from the mainboard, except CPU and PSU. If it gives a beep, proceed with step 5 try another PSU. try another CPU. try another mainboard. Connect components until you find the one which causes the trouble. Blow in every connector to clean it from dust. Start with the memory. Keyboard Graphic card Harddrive the rest, one by one If you've put back everything and it works again, it was maybe a loose connection. Make a backup and keep it up to date. Will save your life. Hope that helps

09-12-2006, 06:06 AM	#17
nico-t emperor of my world Join Date: Aug 2004 Location: nethalands Posts: 29,903	wow... i just pulled every plug from the back, and got a shock when i touched the freshly pulled out printer plug... now i totally disconnected that printer so now i only got the power plug & ofcourse the monitor connected, and now it's working again..... could it be that the printer was cousing some kinda malfunction

09-12-2006, 06:24 AM	#19
TSGlider Confirmed User Industry Role: Join Date: Aug 2006 Posts: 673	It sounds like you've got a power source issue. Might be a good idea to replace it or have someone do it for you. Inexpensive and pretty easy. __________________ BaDoink skype: tsglider

09-12-2006, 06:44 AM	#22
Itchy Datetronix.com Industry Role: Join Date: Jan 2001 Location: Chill-A-Wack BC Posts: 6,524	__________________ ICQ: 2588560 Skype: Pornocop

09-12-2006, 06:44 AM	#23
chainedsarah Registered User Join Date: Sep 2006 Location: Germany Posts: 62	usually only i do ruin pc s __________________ hit me! beat me!

09-12-2006, 07:53 AM	#24
E$_manager Too lazy to set a custom title Join Date: Apr 2006 Location: pink adult dreams Posts: 13,557	where are you typing from? __________________ Enjoy more sales with EnjoyBucks! Homemade: Asian : Ebony : GFs : Voyeur : Nudist : Public : 3D