GoFuckYourself.com - Adult Webmaster Forum

GoFuckYourself.com - Adult Webmaster Forum (https://gfy.com/index.php)
-   Fucking Around & Business Discussion (https://gfy.com/forumdisplay.php?f=26)
-   -   Is anyone willing to share the IP range list for OHIO? (https://gfy.com/showthread.php?t=1159481)

NALEM 01-21-2015 09:54 PM

Is anyone willing to share the IP range list for OHIO?
 
I would sincerely appreciate it.

alex AT nalem DOT com

gebu 01-21-2015 11:18 PM

IP ranges aren't specific to states.

TidalWave 01-21-2015 11:27 PM

Quote:

Originally Posted by gebu (Post 20366475)
IP ranges aren't specific to states.

errr durrrrr.

https://www.arin.net/knowledge/rirs/countries.html

thats as specific as you will get unless you some how figure out how to scam access to and spider the current registration lists and filter for registered corporate addresses.

NALEM 01-21-2015 11:34 PM

Found a source for known IP blocks for Ohio. Hoping that someone has their own list also, to compare, merge and use.

The Porn Nerd 01-21-2015 11:44 PM

Sure mate, here it is:

01.10.01.11.00.11.00.11.00.00.0.0..0.00.00..0

rowan 01-22-2015 02:16 AM

Quote:

Originally Posted by NALEM (Post 20366481)
Found a source for known IP blocks for Ohio. Hoping that someone has their own list also, to compare, merge and use.

I believe the Maxmind paid DB goes down to city level. GeoIP is never going to be 100% accurate, especially once you're narrowing it down to a relatively small region. It's probably paid because there are staff manually deciphering that the hostname ip1.2.3.4-nyc.provider.com is probably in New York City... but according to WHOIS the administrative contact details for that block are on the other side of the USA.

hadden 01-22-2015 02:35 AM

Latitudes and longitudes Alex

fappingJack 01-22-2015 04:41 AM

IP is unique, isnt it?

Barry-xlovecam 01-22-2015 08:06 AM

https://github.com/maxmind/GeoIP2-perl

The information is in the free GeoIP2 database but you would need to extract it not IP specific (in reverse) -- the intended use.

Use a zip code database to get the Ohio latitude and longitude coordinates for each Ohio city then query the GeoIP2 data.

atom 01-22-2015 08:22 AM

You back tracing bro?

Barry-xlovecam 01-22-2015 08:30 AM

10:19 AM-barry@:barry/SATA4/sites/geoIP/GeoLite2-City-CSV_20150106$ grep --color=always -rni "postal\|zip\|code" *|more
GeoLite2-City-Blocks-IPv4.csv:1:network,geoname_id,registered_country_g eoname_id,represented_country_geoname_id,is_an
onymous_proxy,is_satellite_provider,postal_code,la titude,longitude
GeoLite2-City-Blocks-IPv6.csv:1:network,geoname_id,registered_country_g eoname_id,represented_country_geoname_id,is_an
onymous_proxy,is_satellite_provider,postal_code,la titude,longitude

The location data is in the Free GeoLite2-City-CSV_20150106 at Maxmind -- some assembly required ;)

I think you can do some free lookups if you are just backtracking at Maxmind.

Wasn't all in vain -- nice to know that current US zip code and other countries postal codes data is available on an updated basis for another project of mine ...

NALEM 01-22-2015 08:12 PM

Quote:

Originally Posted by rowan (Post 20366533)
I believe the Maxmind paid DB goes down to city level. GeoIP is never going to be 100% accurate, especially once you're narrowing it down to a relatively small region. It's probably paid because there are staff manually deciphering that the hostname ip1.2.3.4-nyc.provider.com is probably in New York City... but according to WHOIS the administrative contact details for that block are on the other side of the USA.

Quote:

Originally Posted by hadden (Post 20366546)
Latitudes and longitudes Alex

Quote:

Originally Posted by Barry-xlovecam (Post 20366732)
https://github.com/maxmind/GeoIP2-perl

The information is in the free GeoIP2 database but you would need to extract it not IP specific (in reverse) -- the intended use.

Use a zip code database to get the Ohio latitude and longitude coordinates for each Ohio city then query the GeoIP2 data.

Quote:

Originally Posted by Barry-xlovecam (Post 20366775)
10:19 AM-barry@:barry/SATA4/sites/geoIP/GeoLite2-City-CSV_20150106$ grep --color=always -rni "postal\|zip\|code" *|more
GeoLite2-City-Blocks-IPv4.csv:1:network,geoname_id,registered_country_g eoname_id,represented_country_geoname_id,is_an
onymous_proxy,is_satellite_provider,postal_code,la titude,longitude
GeoLite2-City-Blocks-IPv6.csv:1:network,geoname_id,registered_country_g eoname_id,represented_country_geoname_id,is_an
onymous_proxy,is_satellite_provider,postal_code,la titude,longitude

The location data is in the Free GeoLite2-City-CSV_20150106 at Maxmind -- some assembly required ;)

I think you can do some free lookups if you are just backtracking at Maxmind.

Wasn't all in vain -- nice to know that current US zip code and other countries postal codes data is available on an updated basis for another project of mine ...

Thank you all for the additional resources. Sent the details you shared over. The zip code data is something of a bonus also, which I asked my guy to look into for another project. So an extra thank you!!! :thumbsup


All times are GMT -7. The time now is 04:08 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
©2000-, AI Media Network Inc