Im making a ak 47 today what you doin?
 

Being peaceful, enjoying my tulips.

http://i.imgur.com/AaH80Da.jpg

i went to home depot at 5:30 to get the parts :1orglaugh i cant wait to shoot it! :1orglaugh

What's so special about that? You have never needed a background check to buy an assault rifle. The only wait time at all is for handguns and of course special permit needed for a full auto..

No need to build one, you can buy one any day of the week face to face..

i want to build one! no numbers!

I don't believe you do anything you say do. Post photos or shut the fuck up.

Maybe the girls and I will have a can shooting contest today! It's all I got.

See what you started? I went from peaceful tulips to murdering cans!

http://i.imgur.com/tFcWUuw.jpg

Ps. yes I should paint my nails. Eek.

I couldn't even buy a pellet gun in NJ for my husband at Christmas without a permit or license - whatever they needed.

ill post pics when i build it. :) i dont post pics because sum of you are krazy!

In between the busy times of working for Paypal you know there's always time to build your own AK 47...

Now, where is that picture, of the guy, his M16, the flag and the burning KFC bucket???

:1orglaugh:1orglaugh:1orglaugh well im curious can this be a real gun. :helpme ive seen a m 16 built from one of those 3d machines

Ahhh, good, here it is:

https://i.imgur.com/gbHM4EI.jpg

I nailed Shannon from behind on top of that very same bed and comforter.

:2 cents:

god you crack me up! no matter if i hate u!

Our army has enough assault rifles, no need to make one. Actually some hundred thousand was just recently destroyed out of the way (although that seemed quite pointless).

A perfect way for a dickhead felon to spends his day

That's cute. :321GFY

:1orglaugh:1orglaugh:1orglaugh

I made an AMD-65 a long time ago. I used an 80% receiver where I had to drill the holes and install the lower rails. Now you can get one with the rails already installed.
80% AK47 Receiver Blank - Henderson Defense Industries

I took it apart and built it again with a tapco flat. Just to see if I could do it. The best way to bend a flat is to get a press and a jig. I made a jig out of a block of wood and bent it with a hammer and another block of wood.

Both times I drilled and tapped, then screwed the receiver to the trunions. I also screwed the lower rails into place. Rivits would have looked better as well as spot welding the lower rails into place. I heat treated the rails and holes with a MAPP torch. It was ugly, But it worked. I took it apart and sold the pieces to somebody that did a better job.

Best way is to go to a build party. Where people have all the tools. BTW: There is a response video showing where the guy in the original video committed 3 felonies during his build and disposal.

Here is the response video

I also want to enjoy your twolips

:1orglaugh:1orglaugh:1orglaugh:1orglaugh:1orglaugh

being a member of the crips, arnt you a convicted felon?

I plan on banging the wife during lunch but that's about it for today.

This is absolutely not true.

rights have been restored thank you :pimp

that's not ak47.


this is ak47,

http://thefarmacist.com/wp-content/u...0/10/AK-47.jpg

you care to be a test subject my hobo friend???

I have built a few AR15s and always wanted to build an AK. good luck with your build!

Nice. I'm making forty-seven zip guns to smuggle into prison.

why the insult? i'm just having a bit of crocodile dundee fun in your fucked-up thread

Now you are a convicted felon? Awesome. Clearly you really do work for PayPal just like you said you did. Good luck with your untraceable assault rifle in Compton CA.. you really do sound like a model employee

this what i am doing

B snichen on b snitchen

http://i.imgur.com/osbl5NN.png

Yes it is true.. you can buy any gun you want face to face, short of a class 5 or what ever full autos are. Hell you can even bypass the handgun waiting period by buying used or at a gun show.

http://i.imgur.com/sgNsi1N.gif

Why? You ruined it. :2 cents:

I bet. so you got a pardon?

GFY Safety Alert - Concerning User Brassmonkey
 

He's claimed to be from Compton California
He's claimed to be a member of the violent street gang called the Crips
He's alluded to being a convicted felon
He frequently makes veiled threats to others on this forum (ex yesterday: "accidents happen dogg!")
He's claimed he works for PayPal

Now he is trying to purchase and assemble an unregistered and untraceable assault rifle specifically stating that his attraction to it is there are no "numbers"... i.e. serial numbers.
i want to build one! no numbers!

If you see this man, please avoid him as he's clearly mentally unstable, likely armed, a fucking sniveling hypocrite, a compulsive liar and a whiny little bitch... oh, and apparently a grandfather in spite of acting like a 16 year old (congrats bro!)

This is what you said and what I was disagreeing with;

To buy an "Assault Rifle" which implies it is full auto even though it's not. An FBI background check is required. This goes for any rifle, even ruger 22's. The past 2 gun shows I have been at, one of which is huge, requires background checks on any guns purchased there - Rifles or handguns.

As far as private party purchases. Anything that is shipped must go to FFL dealer, where upon the FBI check is then done before you can take possession of the firearm

If you are talking about private party sales, then no nothing is needed. However, if you go to armslist where most local private party sales occur, you will see the majority of listings on that site are local dealers and pawn shops. All of which will require the FBI check so they do not lose their FFL.

Most of the other guys that move guns on there that sell private, including myself require a valid permit to purchase or permit to carry. Either of these cards indicate that you have passed the FBI background check and the local sheriff has signed off on it.

While there are back alley deals and rare instances where this can be bypassed, it is not nearly as common or easy as you think.

"assault rifle" does not imply "full auto"... not legally and not by anyone. Besides, you can't "imply full auto"... either it is and you must have a class 3 dealers license or it isn't.

I'm torn on building a AK47 or going fishing? fuckit I'll prolly just sit here on gfy. Maybe do some work, watch some NBA, DVRs, and end the day by drinking too much beer and Don julio..

http://s3.amazonaws.com/rapgenius/13...shing-pole.jpg

TheSquealer lets test it out man you kool?

Test what? I can't blame you for not speaking English well... after all, you've been deprived of an education by living in one of the shittiest parts of the country and basically being raised by a street gang, but you're gonna have to do your best to clarify what you mean so i can respond intelligently, as if you also communicate intelligently.

I'm feeling charitable, since I'd be a bit embarrassed to be a grandfather, act like you and spell and communicate like a 1/2 retarded 13 yr old... let us help you help yourself.

You try to say something and we'll all let you know how totally fucking retarded you sound and correct you.

pm me your address man

Why so cryptic "dogg"?

You can't man up and say what you're trying to say?

Seems an awful lot like you are threatening to buy an unregistered assualt rifle with no serial numbers, assemble it and then murder me.

And you wonder why i think you're a fucking disease?

Assault rifle is technically defined as a select fire rifle which can give it single, burst or full auto capability depending on the weapon. So for him to say it, it does imply he is talking about a fully auto weapon.

Can't talk now... Brassmonkey is threatening to murder me.

:2 cents:

go hide in some work boots....

:1orglaugh:1orglaugh:1orglaugh:1orglaugh

I would, but I suspect he hates work boots just as much, if not more than me.

i promise i will not harm you. i know how your kind think