Need Video Editing Help - GoFuckYourself.com

Cameltoepro · 10-25-2019, 02:36 PM

Hi Everyone. I shot an amateur pee shoot with a second camera I had as my primary one died on me. Unfortunately, I'm trying to edit it. I have tried adobe premiere cc 2019 light effect no help. I have tried RG Magic bullet denosier III. That helped. Yet the video is so dark and yellow brown. How can I correct this shit show?

jsmih · 10-25-2019, 07:18 PM

You might want to try loading it in to Photoshop, so you can use it's adjustment tools if they're better than Premier (I don't use Premier, so I don't know if it has everything PS has).

billywatson · 10-25-2019, 07:59 PM

I use FCX, and I'd drop the temp (bring it down to about 4000 and start bumping it up from there) and then do your best with brightness/contrast...it'll be tough. But it will look better.

candyflip · 10-26-2019, 07:16 AM

I consider myself a fairly competent color grader. I do it daily and get paid well for it, so I must be doing something right.

This is what I managed to come up with. This footage is bad. Sorry.

celandina · 10-26-2019, 07:20 AM

You cannot make light same way you cannot fix focus....Time for a reshoot

SpicyM · 10-26-2019, 07:51 AM

Quote:

Originally Posted by candyflip

I consider myself a fairly competent color grader. I do it daily and get paid well for it, so I must be doing something right.

This is what I managed to come up with. This footage is bad. Sorry.

the original picture looks better

SpicyM · 10-26-2019, 07:54 AM

Quote:

Originally Posted by Cameltoepro

Hi Everyone. I shot an amateur pee shoot with a second camera I had as my primary one died on me. Unfortunately, I'm trying to edit it. I have tried adobe premiere cc 2019 light effect no help. I have tried RG Magic bullet denosier III. That helped. Yet the video is so dark and yellow brown. How can I correct this shit show?

Need to see a short clip from the scene to judge. At least 1 minute.

candyflip · 10-26-2019, 08:15 AM

Quote:

Originally Posted by SpicyM

the original picture looks better

I think so too. At least you can go for the shitty amateur look. Once you start trying to mess with shitty footage, it only gets worse.

There's really no fixing it. Denoise was probably the best thing he could have done.

Cameltoepro · 10-26-2019, 11:53 AM

Yeap..worst time for my normal video camera with a light to die. Have to buy a new one..I have been tweaking it more. Yet, not much difference. Will keep trying. Thanks for all the help.

Grapesoda · 10-26-2019, 01:51 PM

Quote:

Originally Posted by Cameltoepro

Hi Everyone. I shot an amateur pee shoot with a second camera I had as my primary one died on me. Unfortunately, I'm trying to edit it. I have tried adobe premiere cc 2019 light effect no help. I have tried RG Magic bullet denosier III. That helped. Yet the video is so dark and yellow brown. How can I correct this shit show?

Use the pro trick to rescue bad footage...!!

go B&W, bring the light up in the mids and bottom a bit then touch in the contrast a bit.... then it will be arty!

Cameltoepro · 10-26-2019, 02:25 PM

Quote:

Originally Posted by Grapesoda

Use the pro trick to rescue bad footage...!!

go B&W, bring the light up in the mids and bottom a bit then touch in the contrast a bit.... then it will be arty!

Thanks..Going to give it a try.

jsmih · 10-26-2019, 06:04 PM

I played around a bit in Photoshop

Grapesoda · 10-27-2019, 10:21 AM

Quote:

Originally Posted by jsmih

I played around a bit in Photoshop

in the past I have exported a 10-14 min vid into PS, fixed the issues, ran a batch on the images and then exported the 'stills' back into a video... looked fucking awesome but time consuming. something like 12-14K stills if I remember correctly.

jsmih · 10-27-2019, 02:09 PM

Quote:

Originally Posted by Grapesoda

in the past I have exported a 10-14 min vid into PS, fixed the issues, ran a batch on the images and then exported the 'stills' back into a video... looked fucking awesome but time consuming. something like 12-14K stills if I remember correctly.

It also lets you import and then re-render video directly, without the need to make individual stills.

Grapesoda · 10-27-2019, 07:19 PM

I did that to use ps editing sandbox.

RyuLion · 10-28-2019, 09:58 PM

https://filtergrade.com/product/jaso...troom-presets/

candyflip · 10-29-2019, 11:07 AM

Quote:

Originally Posted by RyuLion

https://filtergrade.com/product/jaso...troom-presets/

These will literally do NOTHING for him.

PornDiscounts-V · 10-29-2019, 12:47 PM

Quote:

Originally Posted by Grapesoda

in the past I have exported a 10-14 min vid into PS, fixed the issues, ran a batch on the images and then exported the 'stills' back into a video... looked fucking awesome but time consuming. something like 12-14K stills if I remember correctly.

So old school.

Just do this: https://imagenomic.com/Products/VideoSuite

Get 6 months, or send me the video at john at porndiscounts.com and I'll do a quick run on it with it and send you the result. If you like it, you can purchase it and fine tune it as needed.

SpicyM · 10-29-2019, 02:09 PM

Quote:

Originally Posted by PornDiscounts-V

So old school.

Just do this: https://imagenomic.com/Products/VideoSuite

Get 6 months, or send me the video at john at porndiscounts.com and I'll do a quick run on it with it and send you the result. If you like it, you can purchase it and fine tune it as needed.

Seeing those samples, it can't look more fake than that...

She looks like a fucking plastic doll

It actually looks much better "before" than "after"

Cameltoepro · 11-02-2019, 01:40 PM

well I got it to the best I can. I edited it in photoshop video. Rendered it there. Open in Premiere and tweak it with RG Magic Bullet.Denoiser III and colorista IV. This is before I render it the last time. Below are the before and after

Grapesoda · 11-03-2019, 03:43 PM

As long as the clients buy the clip what you think is immaterial....looks good

PornDiscounts-V · 11-05-2019, 08:54 AM

Quote:

Originally Posted by SpicyM

Seeing those samples, it can't look more fake than that...

She looks like a fucking plastic doll

It actually looks much better "before" than "after"

Smoothing skin is just one of the things the plugins do. They also automate color, exposure, levels, tint, etc correction.

10-25-2019, 02:36 PM	#1
Cameltoepro Confirmed User Industry Role: Join Date: Sep 2012 Posts: 1,481	Need Video Editing Help Hi Everyone. I shot an amateur pee shoot with a second camera I had as my primary one died on me. Unfortunately, I'm trying to edit it. I have tried adobe premiere cc 2019 light effect no help. I have tried RG Magic bullet denosier III. That helped. Yet the video is so dark and yellow brown. How can I correct this shit show? __________________ Awesome Hosting At Awesome Pricing At Vacares

10-25-2019, 07:59 PM	#3
billywatson Confirmed User Industry Role: Join Date: Aug 2002 Location: The Valley o' Smut. Posts: 3,279	I use FCX, and I'd drop the temp (bring it down to about 4000 and start bumping it up from there) and then do your best with brightness/contrast...it'll be tough. But it will look better. __________________ We're Fabulous! PROTECT YOUR CONTENT on Twitter I Shoot Porn.

10-26-2019, 07:16 AM	#4
candyflip Carpe Visio Industry Role: Join Date: Jul 2002 Location: New York Posts: 43,052	I consider myself a fairly competent color grader. I do it daily and get paid well for it, so I must be doing something right. This is what I managed to come up with. This footage is bad. Sorry. __________________ Spend you some brain. Email Me

10-26-2019, 11:53 AM	#9
Cameltoepro Confirmed User Industry Role: Join Date: Sep 2012 Posts: 1,481	Yeap..worst time for my normal video camera with a light to die. Have to buy a new one..I have been tweaking it more. Yet, not much difference. Will keep trying. Thanks for all the help. __________________ Awesome Hosting At Awesome Pricing At Vacares

10-28-2019, 09:58 PM	#16
RyuLion ClubDomCash.com Industry Role: Join Date: Mar 2003 Location: San Diego Posts: 32,173	https://filtergrade.com/product/jaso...troom-presets/ __________________ Adult Biz Consultant A tech head since 1995

10-25-2019, 07:18 PM	#2
jsmih Confirmed User Industry Role: Join Date: Oct 2010 Posts: 334	You might want to try loading it in to Photoshop, so you can use it's adjustment tools if they're better than Premier (I don't use Premier, so I don't know if it has everything PS has).

10-26-2019, 07:20 AM	#5
celandina Too lazy to set a custom title Industry Role: Join Date: Jun 2006 Posts: 11,343	You cannot make light same way you cannot fix focus....Time for a reshoot

10-26-2019, 06:04 PM	#12
jsmih Confirmed User Industry Role: Join Date: Oct 2010 Posts: 334	I played around a bit in Photoshop

10-27-2019, 07:19 PM	#15
Grapesoda So Fucking Banned Industry Role: Join Date: Jul 2003 Location: Montana Posts: 46,238	I did that to use ps editing sandbox.

11-02-2019, 01:40 PM	#20
Cameltoepro Confirmed User Industry Role: Join Date: Sep 2012 Posts: 1,481	well I got it to the best I can. I edited it in photoshop video. Rendered it there. Open in Premiere and tweak it with RG Magic Bullet.Denoiser III and colorista IV. This is before I render it the last time. Below are the before and after __________________ Awesome Hosting At Awesome Pricing At Vacares

11-03-2019, 03:43 PM	#21
Grapesoda So Fucking Banned Industry Role: Join Date: Jul 2003 Location: Montana Posts: 46,238	As long as the clients buy the clip what you think is immaterial....looks good