re: hd video editing, will more RAM make up for a slightly under-powered processor? - GoFuckYourself.com

dyna mo · 06-10-2011, 08:47 AM

my new video cam records in 1080/60P avchd format that requires a minimum i7 2.8GHz chip. my rig is a i7 2.67GHz and the playback in pp 5.5 is just slightly choppy. my current ram = 6g ddr3. if i double the ram will that make up for the slightly underpowered processor?

AdultKing · 06-10-2011, 08:49 AM

More RAM always helps providing your OS can address it.

More RAM means bigger buffers. Slow hard disks will be the bane of your existence though so check their specs too.

MaDalton · 06-10-2011, 08:50 AM

no

just look at the task manager, you will see that probably not more than 1-2 gb are used by the editing program anyways

and yes, fast HDs help

Lace · 06-10-2011, 08:51 AM

Quote:

Originally Posted by MaDalton

no

just look at the task manager, you will see that probably not more than 1-2 gb are used by the editing program anyways

+1

I've never had any issues with 4gb. I'm running a quadcore which does pretty damn good IMO.

dyna mo · 06-10-2011, 08:52 AM

Quote:

Originally Posted by AdultKing

More RAM always helps providing your OS can address it.

More RAM means bigger buffers. Slow hard disks will be the bane of your existence though so check their specs too.

i have 3 1+TB drives on this box, one of them chatters constantly and takes about 8-10 seconds to access when i try to via windows explorer, it's not my main drive though, do you think that could impact overall performance?

dyna mo · 06-10-2011, 08:54 AM

Quote:

Originally Posted by MaDalton

no

just look at the task manager, you will see that probably not more than 1-2 gb are used by the editing program anyways

and yes, fast HDs help

fuck, i'm only off by 1.33 GHz! new rig i guess.

facialfreak · 06-10-2011, 08:57 AM

Quote:

Originally Posted by dyna mo

i have 3 1+TB drives on this box, one of them chatters constantly and takes about 8-10 seconds to access when i try to via windows explorer, it's not my main drive though, do you think that could impact overall performance?

Check and make sure you have the IDE native role is set to Serial ATA in the BIOS ... not Automatic ...

it should NEVER take 8-10 seconds to read a modern hard drive ...

NoWhErE · 06-10-2011, 08:57 AM

Quote:

Originally Posted by dyna mo

my new video cam records in 1080/60P avchd format that requires a minimum i7 2.8GHz chip. my rig is a i7 2.67GHz and the playback in pp 5.5 is just slightly choppy. my current ram = 6g ddr3. if i double the ram will that make up for the slightly underpowered processor?

No, your CPU isnt fast enough to process and swap all the information being sent from the video. With more RAM you can pre-render longer previews, work on bigger projects involving more clips, etc. But for actual playback, its all about CPU power and your video card.

Try decreasing playback resolution by right clicking on your playback monitor.

OR! Use Proxy Videos. Here is how to work with Proxy Videos :

Premiere Pro comes ready with Adobe Media Encoder, a handy little program for batch transcoding video. Drag your HD video files onto Adobe Media Encoder, select 640x480 as your video size, QuickTime as your file, and JPEG2000 or PNG as your codec while keeping your native framerate.

Why JPEG2000 or PNG? Both codecs are standard cross-platform QuickTime codecs, with JPEG being slightly lossy, and PNG being lossless. You'll end up with compact, high quality proxy videos that you can take between PC or MAC to edit in Premiere Pro.

Next, open up Adobe Premiere Pro and create a new project with a new sequence that matches your proxy video settings. Import all of the proxy videos into your project and go wild with editing. You'll notice your work area and effects previews all pre-render more quickly because your source videos are smaller.

Now here comes the fun part. In the same project, open a new sequence that matches your HD video settings. Return to your proxy sequence, select all of and copy your timeline, then paste the timeline into your HD sequence. All your cuts, effects, and transitions remain in tact.

In your project list, right click each proxy video and select 'Replace Footage' to replace your proxy video with your corresponding HD video file. Voila, you now have a full edit of your HD footage ready to be exported.

MaDalton · 06-10-2011, 08:59 AM

Quote:

Originally Posted by dyna mo

fuck, i'm only off by 1.33 GHz! new rig i guess.

weird - i can edit HD video (1080i at least) on my 5 year old laptop - i guess it also depends on the program (which in my case is Ulead Media Studio Pro - which is not updated anymore unfortunately)

dyna mo · 06-10-2011, 09:03 AM

Quote:

Originally Posted by facialfreak

Check and make sure you have the IDE native role is set to Serial ATA in the BIOS ... not Automatic ...

it should NEVER take 8-10 seconds to read a modern hard drive ...

i will reboot and check that, ty.

Quote:

Originally Posted by NoWhErE

No, your CPU isnt fast enough to process and swap all the information being sent from the video. With more RAM you can pre-render longer previews, work on bigger projects involving more clips, etc. But for actual playback, its all about CPU power and your video card.

Try decreasing playback resolution by right clicking on your playback monitor.

OR! Use Proxy Videos. Here is how to work with Proxy Videos :

Premiere Pro comes ready with Adobe Media Encoder, a handy little program for batch transcoding video. Drag your HD video files onto Adobe Media Encoder, select 640x480 as your video size, QuickTime as your file, and JPEG2000 or PNG as your codec while keeping your native framerate.

Why JPEG2000 or PNG? Both codecs are standard cross-platform QuickTime codecs, with JPEG being slightly lossy, and PNG being lossless. You'll end up with compact, high quality proxy videos that you can take between PC or MAC to edit in Premiere Pro.

Next, open up Adobe Premiere Pro and create a new project with a new sequence that matches your proxy video settings. Import all of the proxy videos into your project and go wild with editing. You'll notice your work area and effects previews all pre-render more quickly because your source videos are smaller.

Now here comes the fun part. In the same project, open a new sequence that matches your HD video settings. Return to your proxy sequence, select all of and copy your timeline, then paste the timeline into your HD sequence. All your cuts, effects, and transitions remain in tact.

In your project list, right click each proxy video and select 'Replace Footage' to replace your proxy video with your corresponding HD video file. Voila, you now have a full edit of your HD footage ready to be exported.

i will take a closer look at this, ty. re: proxy video, i had hoped cineform NEO would handle the AVCHD format but NEO doesn't even see a recording device when i hook up the new cam to the computer. i've got a trouble ticket in at cineform now to see what that issue is, i'm hoping that will work instead of having to get a new machine.

ty!

dyna mo · 06-10-2011, 09:04 AM

Quote:

Originally Posted by MaDalton

weird - i can edit HD video (1080i at least) on my 5 year old laptop - i guess it also depends on the program (which in my case is Ulead Media Studio Pro - which is not updated anymore unfortunately)

1080/60p avchd is a different animal. i can edit & render 1080i all day.

NoWhErE · 06-10-2011, 09:05 AM

Quote:

Originally Posted by dyna mo

i will reboot and check that, ty.

i will take a closer look at this, ty. re: proxy video, i had hoped cineform NEO would handle the AVCHD format but NEO doesn't even see a recording device when i hook up the new cam to the computer. i've got a trouble ticket in at cineform now to see what that issue is, i'm hoping that will work instead of having to get a new machine.

ty!

I guarantee you don't need a new machine.

Phoenix · 06-10-2011, 09:05 AM

no i dont believe it will
your speed is probably hampered by the board it is on as well
so sometimes doubling up ram is a waste of money

dyna mo · 06-10-2011, 11:01 AM

Quote:

Originally Posted by NoWhErE

I guarantee you don't need a new machine.

i would like to follow up on your guarantee eh.

even the camera owner's manual states a min 2.8 i7 is required for smooth playback of 1080/60p avchd video.

munki · 06-10-2011, 11:04 AM

Quote:

Originally Posted by NoWhErE

No, your CPU isnt fast enough to process and swap all the information being sent from the video. With more RAM you can pre-render longer previews, work on bigger projects involving more clips, etc. But for actual playback, its all about CPU power and your video card.

Try decreasing playback resolution by right clicking on your playback monitor.

OR! Use Proxy Videos. Here is how to work with Proxy Videos :

Premiere Pro comes ready with Adobe Media Encoder, a handy little program for batch transcoding video. Drag your HD video files onto Adobe Media Encoder, select 640x480 as your video size, QuickTime as your file, and JPEG2000 or PNG as your codec while keeping your native framerate.

Why JPEG2000 or PNG? Both codecs are standard cross-platform QuickTime codecs, with JPEG being slightly lossy, and PNG being lossless. You'll end up with compact, high quality proxy videos that you can take between PC or MAC to edit in Premiere Pro.

Next, open up Adobe Premiere Pro and create a new project with a new sequence that matches your proxy video settings. Import all of the proxy videos into your project and go wild with editing. You'll notice your work area and effects previews all pre-render more quickly because your source videos are smaller.

Now here comes the fun part. In the same project, open a new sequence that matches your HD video settings. Return to your proxy sequence, select all of and copy your timeline, then paste the timeline into your HD sequence. All your cuts, effects, and transitions remain in tact.

In your project list, right click each proxy video and select 'Replace Footage' to replace your proxy video with your corresponding HD video file. Voila, you now have a full edit of your HD footage ready to be exported.

Bit of a different approach to proxy videos, but same result eod using this method...

I typically setup my projects from source vid first, then dump source vids to proxy directly from Premier or After Effects... on test/display renders leave your "use proxy" setting on, for final dumps, turn off... Bit less tracking throughout the process, but same general end result.

MaDalton · 06-10-2011, 11:09 AM

Quote:

Originally Posted by dyna mo

1080/60p avchd is a different animal. i can edit & render 1080i all day.

i'm old fashioned

dyna mo · 06-10-2011, 11:22 AM

Quote:

Originally Posted by NoWhErE

No, your CPU isnt fast enough to process and swap all the information being sent from the video. With more RAM you can pre-render longer previews, work on bigger projects involving more clips, etc. But for actual playback, its all about CPU power and your video card.

Try decreasing playback resolution by right clicking on your playback monitor.

OR! Use Proxy Videos. Here is how to work with Proxy Videos :

Premiere Pro comes ready with Adobe Media Encoder, a handy little program for batch transcoding video. Drag your HD video files onto Adobe Media Encoder, select 640x480 as your video size, QuickTime as your file, and JPEG2000 or PNG as your codec while keeping your native framerate.

Why JPEG2000 or PNG? Both codecs are standard cross-platform QuickTime codecs, with JPEG being slightly lossy, and PNG being lossless. You'll end up with compact, high quality proxy videos that you can take between PC or MAC to edit in Premiere Pro.

Next, open up Adobe Premiere Pro and create a new project with a new sequence that matches your proxy video settings. Import all of the proxy videos into your project and go wild with editing. You'll notice your work area and effects previews all pre-render more quickly because your source videos are smaller.

Now here comes the fun part. In the same project, open a new sequence that matches your HD video settings. Return to your proxy sequence, select all of and copy your timeline, then paste the timeline into your HD sequence. All your cuts, effects, and transitions remain in tact.

In your project list, right click each proxy video and select 'Replace Footage' to replace your proxy video with your corresponding HD video file. Voila, you now have a full edit of your HD footage ready to be exported.

trying this, 1st issue is PNG encodes the 1st frame as a static image.

pornguy · 06-10-2011, 11:38 AM

I am replacing mine with a new i7 turbo3.4 8 gigs of ram. Be careful how far you go with the ram as some i7 chips and mother boards wont take more than 8.

and you need a 64bit os.

NoWhErE · 06-10-2011, 11:40 AM

Quote:

Originally Posted by dyna mo

trying this, 1st issue is PNG encodes the 1st frame as a static image.

I usually use Quicktime - PHOTO JPG (or JPG2000).

Whatever you use, the point is to downgrade the quality to a 640x480 format and use that to make your edits, then replace those shitty quality videos with the HD files once you're done.

dyna mo · 06-10-2011, 11:42 AM

Quote:

Originally Posted by NoWhErE

No, your CPU isnt fast enough to process and swap all the information being sent from the video. With more RAM you can pre-render longer previews, work on bigger projects involving more clips, etc. But for actual playback, its all about CPU power and your video card.

Try decreasing playback resolution by right clicking on your playback monitor.

OR! Use Proxy Videos. Here is how to work with Proxy Videos :

Premiere Pro comes ready with Adobe Media Encoder, a handy little program for batch transcoding video. Drag your HD video files onto Adobe Media Encoder, select 640x480 as your video size, QuickTime as your file, and JPEG2000 or PNG as your codec while keeping your native framerate.

Why JPEG2000 or PNG? Both codecs are standard cross-platform QuickTime codecs, with JPEG being slightly lossy, and PNG being lossless. You'll end up with compact, high quality proxy videos that you can take between PC or MAC to edit in Premiere Pro.

Next, open up Adobe Premiere Pro and create a new project with a new sequence that matches your proxy video settings. Import all of the proxy videos into your project and go wild with editing. You'll notice your work area and effects previews all pre-render more quickly because your source videos are smaller.

Now here comes the fun part. In the same project, open a new sequence that matches your HD video settings. Return to your proxy sequence, select all of and copy your timeline, then paste the timeline into your HD sequence. All your cuts, effects, and transitions remain in tact.

In your project list, right click each proxy video and select 'Replace Footage' to replace your proxy video with your corresponding HD video file. Voila, you now have a full edit of your HD footage ready to be exported.

i just encoded the file in uncompressed avi and edited the proxy video, now i set-up the second sequence and all, right clicked to replace video and only get a *replace clip-->from bin. there's nothing there, nothing happens, that doesn't work. :-(

NoWhErE · 06-10-2011, 11:50 AM

Quote:

Originally Posted by dyna mo

i just encoded the file in uncompressed avi and edited the proxy video, now i set-up the second sequence and all, right clicked to replace video and only get a *replace clip-->from bin. there's nothing there, nothing happens, that doesn't work. :-(

Then you're doing something wrong. I used to do this on a daily basis when HD first came out.

1 - Take all your HD clips in the bin and throw them into media encoder. Make low resolution version of them.

2 - Make a timeline with the low resolution settings (example : 640x480). Edit the video using the low res files that are now in your bin.

3 - Once done, create a new timeline with HD settings (HDV 1080i60 for example).

4 - Copy and paste the clips from the low-res timeline into the new High-res Timeline. Everything will be exactly the same.

5 - Go to your bin, right click on the low-res files and select REPLACE FOOTAGE. Select the corresponding HD file from your harddrive.

6 - Do that for every low-res clip you have in your bin. Voilà You should now have a fully edited HD timeline. No lag or hiccups while editing.

dyna mo · 06-10-2011, 11:51 AM

screencap, i click *from bin* and nothing happens. :-(

NoWhErE · 06-10-2011, 12:06 PM

You're not clicking on the clip IN THE BIN

see image for what I mean

dyna mo · 06-10-2011, 12:08 PM

Quote:

Originally Posted by NoWhErE

Then you're doing something wrong. I used to do this on a daily basis when HD first came out.

i understand that. i am not challenging you, nevertheless, i am not able to duplicate your suggestion.

i've transcoded the original into playable avi, edited that, copied it into a 2nd sequence, loaded the original vid into the source screen, right clicked the timeline and selected replace footage with video from source screen, it just jams in to the shorter timeline the same timeline and just clips off the end.

NoWhErE · 06-10-2011, 12:14 PM

Quote:

Originally Posted by dyna mo

i understand that. i am not challenging you, nevertheless, i am not able to duplicate your suggestion.

i've transcoded the original into playable avi, edited that, copied it into a 2nd sequence, loaded the original vid into the source screen, right clicked the timeline and selected replace footage with video from source screen, it just jams in to the shorter timeline the same timeline and just clips off the end.

I know you're not challenging me, I'm just saying I used this method alot

Ok, this is what you're doing wrong : loaded the original vid into the source screen, right clicked the timeline and selected replace footage with video from source screen

Actually, you don't need to load the original vid into the source screen.

Once you've copied the low-res timeline into the High-Res Timeline, go to your BIN (the window at the far left where your low res clips are stored) and right click on the video file in the bin. A menu will popup with the option to REPLACE FOOTAGE.

Click that. A browser window will popup, go find your HD video. Select it.

Boom. You're low res file is now replaced with its high res version.

dyna mo · 06-10-2011, 12:18 PM

Quote:

Originally Posted by NoWhErE

I know you're not challenging me, I'm just saying I used this method alot

Ok, this is what you're doing wrong : loaded the original vid into the source screen, right clicked the timeline and selected replace footage with video from source screen

Actually, you don't need to load the original vid into the source screen.

Once you've copied the low-res timeline into the High-Res Timeline, go to your BIN (the window at the far left where your low res clips are stored) and right click on the video file in the bin. A menu will popup with the option to REPLACE FOOTAGE.

Click that. A browser window will popup, go find your HD video. Select it.

Boom. You're low res file is now replaced with its high res version.

i appreciate the help but same result.

the edit i did to the avi was clip out several minutes from the middle, i then used that timeline in the new sequence #2, highlighted it, went to the bin, selected it, right clicked, replace footage, found the original avchd file and clicked it, it clipped the end of the video off to make it fit, it did not clip out the middle section as it was edited.

datatank · 06-10-2011, 12:24 PM

I always found that having the operating system on a seperate HDD than the video sped things up. Be sure to get a super fast HDD too.

dyna mo · 06-10-2011, 12:24 PM

Quote:

Originally Posted by NoWhErE

I know you're not challenging me, I'm just saying I used this method alot

Ok, this is what you're doing wrong : loaded the original vid into the source screen, right clicked the timeline and selected replace footage with video from source screen

Actually, you don't need to load the original vid into the source screen.

Once you've copied the low-res timeline into the High-Res Timeline, go to your BIN (the window at the far left where your low res clips are stored) and right click on the video file in the bin. A menu will popup with the option to REPLACE FOOTAGE.

Click that. A browser window will popup, go find your HD video. Select it.

Boom. You're low res file is now replaced with its high res version.

ok, i got it, finally! fuck. thank you.. this should work well.

munki · 06-10-2011, 12:25 PM

Quote:

Originally Posted by dyna mo

i appreciate the help but same result.

the edit i did to the avi was clip out several minutes from the middle, i then used that timeline in the new sequence #2, highlighted it, went to the bin, selected it, right clicked, replace footage, found the original avchd file and clicked it, it clipped the end of the video off to make it fit, it did not clip out the middle section as it was edited.

Built for AE, but same general process in Premiere... this is the flow I have been using for years.

NoWhErE · 06-10-2011, 12:31 PM

Quote:

Originally Posted by dyna mo

ok, i got it, finally! fuck. thank you.. this should work well.

No problem, now go promote CrakCash

dyna mo · 06-10-2011, 12:33 PM

Quote:

Originally Posted by munki

Built for AE, but same general process in Premiere... this is the flow I have been using for years.

yeah, i was messing up by exporting a complete timeline after the edits then using that.

thanks for the help everyone and nowhere especially.

dyna mo · 06-10-2011, 12:36 PM

Quote:

Originally Posted by NoWhErE

No problem, now go promote CrakCash

as long as there are no naked pics of jman involved!

NoWhErE · 06-10-2011, 12:40 PM

Quote:

Originally Posted by dyna mo

as long as there are no naked pics of jman involved!

Sorry, I can't promise that.

PornoMonster · 06-10-2011, 01:46 PM

From my experience, get the BEST Video card you can.
Then again you should have the fastest CPU out also, but if not, the better the video card the more it helps.
The computer I use for video editing is also only used for that, so it is almost Never on the internet.
Thus, I can remove ALL BS running programs including all Anti Virus.

Adding more ram can never be a bad thing. Yes some people will say Video only uses 2 gig or something, but let me tell you, when I doubled mine, it sure did help.
Not sure if it helped with the bottle necking or whatever but it helps.

Also YES dissable that slow ass HD you have.
Also have fast Hard drives to write to, helps..

Keep in mind every little bit helps......

PornoMonster · 06-10-2011, 01:47 PM

Quote:

Originally Posted by datatank

I always found that having the operating system on a seperate HDD than the video sped things up. Be sure to get a super fast HDD too.

YEP YEP
And no extra External drives running.

munki · 06-10-2011, 01:50 PM

Quote:

Originally Posted by PornoMonster

YEP YEP
And no extra External drives running.

Or have the right externals... I run a RAID external connected through esata... just as fast as anyones internals outside off SSD

DirtyDanza · 06-10-2011, 02:33 PM

no matter what you do it will never edit like a mac sorry

sell it get the new macpro and final cut and call it a day

06-10-2011, 08:47 AM	#1
dyna mo The People's Post Industry Role: Join Date: Dec 2008 Location: invisible 7-11 Posts: 64,320	re: hd video editing, will more RAM make up for a slightly under-powered processor? my new video cam records in 1080/60P avchd format that requires a minimum i7 2.8GHz chip. my rig is a i7 2.67GHz and the playback in pp 5.5 is just slightly choppy. my current ram = 6g ddr3. if i double the ram will that make up for the slightly underpowered processor?

06-10-2011, 08:50 AM	#3
MaDalton I am Amazing Content! Industry Role: Join Date: Feb 2004 Posts: 39,822	no just look at the task manager, you will see that probably not more than 1-2 gb are used by the editing program anyways and yes, fast HDs help __________________ AmazingContent.com - providing only the best content and service since 2003 Monetize your content on Veegaz.com - one of Germanies largest VOD sites Got German traffic? We convert it into money for you! Skype: madalton02826 - Email: oltecconsult [at] gmail [dot] com

06-10-2011, 09:05 AM	#13
Phoenix BACON BACON BACON Industry Role: Join Date: Nov 2002 Location: Poems everybody, the laddie fancies himself a poet Posts: 35,457	no i dont believe it will your speed is probably hampered by the board it is on as well so sometimes doubling up ram is a waste of money __________________ Skype Phoenixskype1 Telegram PhoenixBrad https://quantads.io

06-10-2011, 11:38 AM	#18
pornguy Too lazy to set a custom title Industry Role: Join Date: Mar 2003 Location: Homeless Posts: 62,911	I am replacing mine with a new i7 turbo3.4 8 gigs of ram. Be careful how far you go with the ram as some i7 chips and mother boards wont take more than 8. and you need a 64bit os. __________________ PornGuy skype me pornguy_epic AmateurDough The Hottes Shemales online! TChicks.com \| Angeles Cid \| Mariana Cordoba \| MAILERS WELCOME!

06-10-2011, 12:06 PM	#23
NoWhErE Too lazy to set a custom title Industry Role: Join Date: Sep 2005 Location: Canada Posts: 10,286	You're not clicking on the clip IN THE BIN see image for what I mean __________________ skype: lordofthecameltoe

06-10-2011, 08:49 AM	#2
AdultKing Raise Your Weapon Industry Role: Join Date: Jun 2003 Location: Outback Australia Posts: 15,601	More RAM always helps providing your OS can address it. More RAM means bigger buffers. Slow hard disks will be the bane of your existence though so check their specs too.

06-10-2011, 11:51 AM	#22
dyna mo The People's Post Industry Role: Join Date: Dec 2008 Location: invisible 7-11 Posts: 64,320	screencap, i click from bin and nothing happens. :-(

06-10-2011, 12:24 PM	#27
datatank Confirmed User Join Date: Aug 2004 Location: My dog is blacker than Tupac Posts: 5,471	I always found that having the operating system on a seperate HDD than the video sped things up. Be sure to get a super fast HDD too.

06-10-2011, 01:46 PM	#34
PornoMonster Confirmed User Industry Role: Join Date: Mar 2003 Posts: 2,257	From my experience, get the BEST Video card you can. Then again you should have the fastest CPU out also, but if not, the better the video card the more it helps. The computer I use for video editing is also only used for that, so it is almost Never on the internet. Thus, I can remove ALL BS running programs including all Anti Virus. Adding more ram can never be a bad thing. Yes some people will say Video only uses 2 gig or something, but let me tell you, when I doubled mine, it sure did help. Not sure if it helped with the bottle necking or whatever but it helps. Also YES dissable that slow ass HD you have. Also have fast Hard drives to write to, helps.. Keep in mind every little bit helps...... __________________ $6 a Month 4 Blade Razors, 4 Cartridges, Includes shipping! Domains 4 Sale CashForVideos.com - Pussy.biz - FootPorn.com - SoloMovie.com - CollegeGirlCams.com - AmateurCamGirls.com - PR3 4 Letter Domain

06-10-2011, 02:33 PM	#37
DirtyDanza Confirmed User Industry Role: Join Date: Aug 2002 Location: BP4L.... Las Vegas, Posts: 8,369	no matter what you do it will never edit like a mac sorry sell it get the new macpro and final cut and call it a day __________________ AVN Nominated Camming Couple