Need ya input, getting screwed and need to fig... - GoFuckYourself.com

Va2k · 03-17-2004, 07:02 AM

Ok heres the freaking deal, the port to put the power cord into the laptop broke, I sent it to compaq it was supposed to be fixed and sent out yesterday I called a few mins ago and found out that their tech said it was damaged by customer.. Wtf would I do this?? SO they are going to try and make me pay for a new motherboard and service fee's they didnt tell me how much yet the service center has to call me back...

Now how the hell would I go by proving I did not break this it did it by its self!

Anyone know what I can or should do?

Thanks
TOM

Brujah · 03-17-2004, 07:06 AM

complain complain complain, call them up twice a day and keep asking to speak to supervisor and then the supervisors boss, and so on. don't ease up til they fix it for you. make them wish you'd just stop calling.

cypocrypt · 03-17-2004, 07:07 AM

unfortunately seems like you are SOL

tbabe · 03-17-2004, 07:09 AM

Quote:

Originally posted by Brujah
complain complain complain, call them up twice a day and keep asking to speak to supervisor and then the supervisors boss, and so on. don't ease up til they fix it for you. make them wish you'd just stop calling.

Thats the way to do it. Probably the only way. Theres a supervisor or someone there who can authorize it to be fixed for free, you just gotta make them hate you enough.

Va2k · 03-17-2004, 07:12 AM

Quote:

Originally posted by Brujah
complain complain complain, call them up twice a day and keep asking to speak to supervisor and then the supervisors boss, and so on. don't ease up til they fix it for you. make them wish you'd just stop calling.

Im trying I talked to the sup this morning, they have to email the service center there is no phone number to contact them bastards

when they do call ill star 69 them and bug them too

TOM

llabtaem · 03-17-2004, 07:18 AM

Try calling the customer service department directly (Not the service department). Explain how you have been a loyal Compaq customer for years. Tell them that you have recommended their machines to many of your friends and family and now you feel like you are getting railroaded. Act irate and insulted that they would even insinuate that this was done by you. Continue asking for bosses until you get the one that will do anything to shut you up. That's what I would do at least... especially if I didn't damage it.

Jedimaster · 03-17-2004, 07:19 AM

Call up and yell.

That reminds me of an audio clip i heard a few years ago,,,some guy calling customer support for his laptop screaming his head off.

SMG · 03-17-2004, 07:23 AM

Quote:

Originally posted by va2k
Im trying I talked to the sup this morning, they have to email the service center there is no phone number to contact them bastards when they do call ill star 69 them and bug them too

TOM

another way this works is just keep calling and talking to the lower level reps, half of them are idiots, one of them is bound to screw up and make a promise he can't keep ... then call back and do a checkup, when the guy says wait the rep said something that he wasnt allowed to do, send to supervisor, they'll have no choice

Va2k · 03-17-2004, 07:25 AM

Quote:

Originally posted by llabtaem
Try calling the customer service department directly (Not the service department). Explain how you have been a loyal Compaq customer for years. Tell them that you have recommended their machines to many of your friends and family and now you feel like you are getting railroaded. Act irate and insulted that they would even insinuate that this was done by you. Continue asking for bosses until you get the one that will do anything to shut you up. That's what I would do at least... especially if I didn't damage it.

I did something sorta like that this morning will keep doing it too thanks

TheEnforcer · 03-17-2004, 07:27 AM

Was just talking about this type of stuff with a close friend of mine and I gotta agree.. make them hate to hear your name/voice on the other end of the line!

PeterDragon · 03-17-2004, 07:29 AM

Go through the customer service department. Keeping calling and keep going higher up. I bitched at Gateway for sending me a computer with 2 256mb DDR RAM instead of the single 512mb chip I was supposed to get. Minor issue but after 3 weeks of me calling and threating to go to the Federal Trade Commission they refunded $400 and sent me 2 512mb DDR RAM so I am $400 fat and running 1.5gb in my machine. Don't stop calling! Bitch, Bitch, Bitch.

hova · 03-17-2004, 07:30 AM

All you can do is keep calling/writing/mailing them. If you do that enough, they will probably help you out. It could take some time tho

Cr34t1v3 · 03-17-2004, 07:31 AM

Quote:

Originally posted by va2k
Ok heres the freaking deal, the port to put the power cord into the laptop broke, I sent it to compaq it was supposed to be fixed and sent out yesterday I called a few mins ago and found out that their tech said it was damaged by customer.. Wtf would I do this?? SO they are going to try and make me pay for a new motherboard and service fee's they didnt tell me how much yet the service center has to call me back...

Now how the hell would I go by proving I did not break this it did it by its self!

Anyone know what I can or should do?

Thanks
TOM

I manage an IT dept and we have these problems often...
Heres the thing...the ports on laptops are so fragile...its
easy to damage them without even knowing. The pricks at
tech support know this. All you have to do is quickly pull the
cords out a few times and its on its way to being damaged.

Usually it is because of the simple act of plugging and unplugging.
After awhile the wear and tear on it causes a malfunction.
Now if this lappy is new...then you definitely have a good
argument. Just make sure they don't hold your system hostage
on you.

If the lap is old..then it might be more difficult getting them to
cover it. Certainly argue until you cant take it anymore...because
you never know...they may get sick of it and give in...or at
least bring the repair fees down...or maybe you can bargain
by just paying the cost of the motherboard...

Good luck.

Va2k · 03-17-2004, 07:34 AM

Quote:

Originally posted by Cr34t1v3

I manage an IT dept and we have these problems often...
Heres the thing...the ports on laptops are so fragile...its
easy to damage them without even knowing. The pricks at
tech support know this. All you have to do is quickly pull the
cords out a few times and its on its way to being damaged.

Usually it is because of the simple act of plugging and unplugging.
After awhile the wear and tear on it causes a malfunction.
Now if this lappy is new...then you definitely have a good
argument. Just make sure they don't hold your system hostage
on you.

If the lap is old..then it might be more difficult getting them to
cover it. Certainly argue until you cant take it anymore...because
you never know...they may get sick of it and give in...or at
least bring the repair fees down...or maybe you can bargain
by just paying the cost of the motherboard...

Good luck.

Thanks it's less then a year old ;( Them rat bastards

TOM

Ash@phpFX · 03-17-2004, 07:35 AM

if it definately wasnt your fault, keep complaining like everyone else said. personally if the problem was that simple id fix it myself, got a soldering iron?

Va2k · 03-17-2004, 08:22 AM

Quote:

Originally posted by asher
if it definately wasnt your fault, keep complaining like everyone else said. personally if the problem was that simple id fix it myself, got a soldering iron?

It wasnt only thing i did was after it broke I took the pc apart to see if I could fix it right then but I couldnt so put it back together and shit
TOM

Cr34t1v3 · 03-17-2004, 09:47 AM

Quote:

Originally posted by va2k

It wasnt only thing i did was after it broke I took the pc apart to see if I could fix it right then but I couldnt so put it back together and shit
TOM

Ooh...that might a problem...there are indicators in the casing
as to whether its been opened...did you tell them this?

If not...don't! Deny it...or tell them you had something
repaired/added. They'll use it against you.

Basic_man · 03-17-2004, 09:49 AM

OWN3D !!

I wish you good luck mate!

Va2k · 03-17-2004, 10:41 AM

Quote:

Originally posted by Cr34t1v3

Ooh...that might a problem...there are indicators in the casing
as to whether its been opened...did you tell them this?

If not...don't! Deny it...or tell them you had something
repaired/added. They'll use it against you.

Ill just tell them the truth that I had to get my dvd cd from the try i couldnt open it so had to open the case *shrugs*

03-17-2004, 07:02 AM	#1
Va2k I’m still alive barley. Industry Role: Join Date: Oct 2001 Location: Va Posts: 10,060	Need ya input, getting screwed and need to fig... Ok heres the freaking deal, the port to put the power cord into the laptop broke, I sent it to compaq it was supposed to be fixed and sent out yesterday I called a few mins ago and found out that their tech said it was damaged by customer.. Wtf would I do this?? SO they are going to try and make me pay for a new motherboard and service fee's they didnt tell me how much yet the service center has to call me back... Now how the hell would I go by proving I did not break this it did it by its self! Anyone know what I can or should do? Thanks TOM __________________

03-17-2004, 07:06 AM	#2
Brujah Beer Money Baron Industry Role: Join Date: Jan 2001 Location: brujah / gmail Posts: 22,157	complain complain complain, call them up twice a day and keep asking to speak to supervisor and then the supervisors boss, and so on. don't ease up til they fix it for you. make them wish you'd just stop calling. __________________ Free Premium Domain Lists and Tools at Clickmojo.com For Sale: Obscenity.com

03-17-2004, 07:27 AM	#10
TheEnforcer Confirmed User Join Date: May 2001 Posts: 2,855	Was just talking about this type of stuff with a close friend of mine and I gotta agree.. make them hate to hear your name/voice on the other end of the line! __________________ Hit me up below for all your advertising needs!

03-17-2004, 07:29 AM	#11
PeterDragon Registered User Join Date: Mar 2004 Location: Mountains of Tennessee Posts: 72	Go through the customer service department. Keeping calling and keep going higher up. I bitched at Gateway for sending me a computer with 2 256mb DDR RAM instead of the single 512mb chip I was supposed to get. Minor issue but after 3 weeks of me calling and threating to go to the Federal Trade Commission they refunded $400 and sent me 2 512mb DDR RAM so I am $400 fat and running 1.5gb in my machine. Don't stop calling! Bitch, Bitch, Bitch. __________________ Some Other Dude Did It.

03-17-2004, 07:30 AM	#12
hova Traffillionaire Industry Role: Join Date: Jan 2002 Location: ICQ:209371571 Posts: 22,430	All you can do is keep calling/writing/mailing them. If you do that enough, they will probably help you out. It could take some time tho __________________ http://traffillions.com/ Sign up and get lifetime revshare on your traffic

03-17-2004, 07:07 AM	#3
cypocrypt Confirmed User Join Date: Dec 2003 Location: New York and on icq 108422465 Posts: 1,851	unfortunately seems like you are SOL

03-17-2004, 07:18 AM	#6
llabtaem Confirmed User Join Date: Feb 2004 Location: Florida Posts: 969	Try calling the customer service department directly (Not the service department). Explain how you have been a loyal Compaq customer for years. Tell them that you have recommended their machines to many of your friends and family and now you feel like you are getting railroaded. Act irate and insulted that they would even insinuate that this was done by you. Continue asking for bosses until you get the one that will do anything to shut you up. That's what I would do at least... especially if I didn't damage it.

03-17-2004, 07:19 AM	#7
Jedimaster Registered User Join Date: Dec 2003 Posts: 2,120	Call up and yell. That reminds me of an audio clip i heard a few years ago,,,some guy calling customer support for his laptop screaming his head off.

03-17-2004, 07:35 AM	#15
Ash@phpFX Confirmed User Join Date: Nov 2003 Posts: 4,292	if it definately wasnt your fault, keep complaining like everyone else said. personally if the problem was that simple id fix it myself, got a soldering iron?

03-17-2004, 09:49 AM	#18
Basic_man Programming King Pin Industry Role: Join Date: Oct 2003 Location: Montreal Posts: 27,360	OWN3D !! I wish you good luck mate! __________________ UUGallery Builder - automated photo/video gallery plugin for Wordpress! Stop looking! Checkout Naked Hosting, online since 1999 !